kumihimo.SOURCE.txt — where the Kumihimo mode of /friendship-bracelet-pattern-maker/ gets its facts (T-PB.350, RULE 1152(a): operator facts are fetched, never remembered). Every page below was fetched on 2026-11-05 with a plain GET; the quotes are copied from the fetched text. fb-kumihimo.js SOURCES names the same URLs and dates. THE MOVE AND THE SLOT NUMBERING (8 cords) 1. Fire Mountain Gems, "How to Make a Spiral Kumihimo Braid" https://www.firemountaingems.com/learn/C647-project-tutorial.html (fetched 2026-11-05) "The kumihimo disk has 32 numbered slots and 4 dots indicating North, East, South and West." "insert strands into the slots on either side of the dots with one color in top slots #32 and #1 and bottom slots #17 and #16 and the second color in right side slots #8 and #9 and left side slots #24 and #25." "Step 7 Bottom left #17 up to top left #31—now there are three strands at the top. Step 8 Move top right #1 down to bottom right #15. Step 9 Rotate disc counterclockwise 1/4 turn. The East slots #8 and #9 are now at the top. Step 10 Move the strand from slot #25 up to slot #7. Step 11 Repeat to move the strand from slot #9 down to slot #23." ... 'Repeat this pattern of "left up, right down, rotate" until you reach desired braid length.' -> used for: the slot numbers (clockwise, 32 at the top, 8 on the right, 24 on the left), the start slots, the move (bottom left up to the left of the top pair, top right down to the right of the bottom pair), the quarter turn anticlockwise, the SPIRAL set-up and its name. The test checks the page's first four moves are exactly 17->31, 1->15, 25->7, 9->23. 2. Artbeads, "Getting Started with Kumihimo" (8 warp basic round braid) https://artbeads.com/design-studio/kumihimo-getting-started/ (fetched 2026-11-05) "the round Kumihimo disk with 32 slits to create an 8 warp basic round braid." "When setting up the disk, the number 32 should be at the top. Starting with 32, place one strand on each side of the dot." "the number 16" ... "the right hand side of the disk ... (the number 8)" ... "the left side of the disk ... (the number 24)." "Step 8 Start by moving the cord in slit 17 up and directly across the disk to slit 31. Step 9 Move cord 1 directly across the disk to slit 15." "Step 10 Turn the Kumihimo disk clockwise 1/4 turn. The black positioning dot at number 24 should now be located at the top. Step 11 Move cord 9 to slit 23. ... Step 12 Move cord 25 across to slit 7." "A good rule of thumb when measuring stringing material is to multiply the length you want by three." -> used for: the slot numbering (second source), the move (second source), and that turning the other way gives the same moves for 8 cords (Artbeads turns clockwise and still moves 9->23 and 25->7, the same cords Fire Mountain Gems moves turning anticlockwise; the test checks this). Also the x3 cord rule. 3. Beadalon, "Kumihimo Braiding Disc - Round" (instruction sheet, PDF) https://www.beadalon.com/images/Kumihimo%20Braiding%20Disc%20Instructions.pdf (fetched 2026-11-05) "Bring the lower left strand up and across the disc to insert it to the left of the two upper strands. Bring the upper right strand down and across the disc to insert it to the right of the lower strand." "Turn the disc counterclockwise one quarter-turn, then repeat the braiding pattern." -> used for: the move, in words (third source). 4. Create Whimsy, "How To Do Kumihimo: Basic Braid-Making Tutorial" (Chardel Blaine) https://createwhimsy.com/projects/how-to-do-kumihimo/ (fetched 2026-11-05) "If your disk is numbered, look for the dots at positions 32, 8, 16 and 24." "Turn the disk one quarter turn. You can go either direction (I go clockwise), but you MUST be consistent with this step throughout the project." "Cut 8 lengths of cording your finished length x 3. For example, for a 6" bracelet, cut 8 lengths that are 18" long each." -> used for: the dots, the turn direction note, and the CORD-LENGTH RULE (each cord 3 x the finished length). THE STANDARD DISK DIAMETER (the PDF draws the disk at this size) 5. Fire Mountain Gems, "Secrets to Kumihimo Project 2 of 9: 8 Strand Round Braid" (design RC3D) https://www.firemountaingems.com/learn/categories/essential-resources/how-tos/RC3D-gallery-of-designs-inspiration-with-instructions.html (fetched 2026-11-05) "Kumihimo disk, EVA foam, white and black, 6-inch round and 3/8 inch thick with 1-1/2 inch inside hole and 32 slots" "Color 1 (e.g., yellow): Top: Slot #32 and Slot #1 Bottom: Slot #16 and Slot #17 Color 2 (e.g., grey): Right: Slot #8 and Slot #9 Left: Slot #24 and Slot #25" ... "Move the bottom left cord (Slot #17) up to Slot #31 ... Move the top right cord (Slot #1) down to Slot #15 ... Rotate the disc counterclockwise 1/4 turn (90 degrees). Move the new bottom left cord (Slot #25) up to Slot #7. Move the top right cord (Slot #9) down to Slot #23." -> used for: DISK = 6 in = 152.4 mm across, hole 1.5 in = 38.1 mm (the PDF's true-size circle; the test measures it from a raster of the PDF), and the spiral set-up and moves again. Create Whimsy (source 4) lists the same size in its kit: "Kumihimo Kit, 6 Inch Round, 6 Inch Square Disk". 16 CORDS 6. YukonReddy, "Kumihimo 16 warp round braid with 2 types of ribbon" http://yukonreddy.blogspot.com/2014/01/kumihimo-16-warp-round-braid-with-2.html (fetched 2026-11-05) "Here is the setup of 16 ribbons, holding the N, or 32, at the top. Now the first step is to take the ribbon from the right side of the 32 and bring it down to the right side of the set directly opposite on the circle, the 15. ... bring the ribbon from the left side of the 16, up to the slot directly opposite above it, the left side of the 31. Next you turn your disk to the right so that the ribbons on either side of 28 are at the top ... take the right side of 28 and bring it down to the right side of 11. Then you take the left side of 12 and bring it up to the left side of 27." "I would have done all 4 main directions (32, 8, 16, 24) in black" "your pairs move over by one tab every time you complete a 'stitch'" -> used for: the 16-cord start slots (either side of 32, 4, 8 ... 28), the eighth turn to the right, the 16-CORD SPIRAL set-up (the four main directions in one colour), and the creep of the pairs. The test checks the page's first four 16-cord moves are 1->15, 17->31, 29->11, 13->27 (the order inside a step does not change where the cords end up). 7. kumihimo.blogspot.com, "Kumihimo Pattern Guide: 8-Strand Round Braid" https://kumihimo.blogspot.com/2025/06/kumihimo-pattern-guide-8-strand-round.html (fetched 2026-11-05) "For 16-strand braids : Use every other slot on the disk and follow the same movement pattern." "2. Solid Color w/ Accent Setup : 7 strands of Color A, 1 strand of Color B Arrangement : Place the accent strand at any slot. Result : A subtle dashed line effect." -> used for: the same move with 16 cords (second source), and the ACCENT LINE set-up (7 + 1, accent in slot 32). Not used: the same page's "Chevron Stripe ... 2 red, 2 blue, 2 red, 2 blue ... A repeating V-shaped pattern": that is the Fire Mountain Gems spiral layout, which the simulation (and Fire Mountain Gems) shows as a spiral. THE OTHER NAMED SET-UP 8. Crafting Step by Step, "How to Make a Kumihimo Bracelet - Easy Foam Disk Method" https://www.craftingstepbystep.com/jewelry-making/how-to-make-a-kumihimo-bracelet (fetched 2026-11-05) "With one colour on slots 16 and 32 and the other on 8 and 24, you get a twisted candy stripe." "Four colours, one on each marked slot, for a spiral." "A good rule is about three inches of strand for every inch of finished braid, plus a few inches for tying off." -> used for: the FOUR-COLOUR SPIRAL set-up (one colour on each dot), and the x3 rule again. ALSO READ (support, not relied on alone) - Dream a Little Bigger, "Kumihimo - 8 Strand Cord Tutorial" https://www.dreamalittlebigger.com/post/kumihimo-8-strand-cord-tutorial.html (fetched 2026-11-05): "take the bottom left strand and move it up to the left of the cords at the top. Take the one at the top that is at the far right and move it to the right of the cord at the bottom." "Keep repeating: Bottom left to top left. Top right to bottom right. Turn." - Wire Jewelry (Judy Larson), "8-Strand Kumihimo" https://wirejewelry.com/jewelry_making_patterns_tutorials/8-Strand-Kumihimo_749.html (fetched 2026-11-05): "Cut each ribbon section twice the length of the finished piece plus 6"" (the page names this as the ribbon exception), "The solid navy blue braided cord at the top of the photo was made with one color." HOW THE COLOURS ARE PLACED ON THE BRAID (worked out here from the moves above, not from a source) Both cords of a step pass the braid point the same way round (up on the left, down on the right: clockwise seen from the numbered face) and each move is 14 slots clockwise, about half a turn. A cord is moved again when its pair has been worked twice: one full turn of the disk later. So every cord lies on the braid as a run of half-turn floats leaning the same way, one spiral lane per cord. fb-kumihimo.js grid() lays the float of a move made at step k by a cord arriving at the pair at angle a over the cells (row k - j, column a - j), j = 0 .. n/2 - 1; the test rebuilds this with its own simulator and checks every cell is covered exactly once. The preview shows the order of the colours only, not texture, thickness or tension.