Letter stencils to print
Pick a font and a letter height and print the whole alphabet, A to Z and 0 to 9, at true size on A4 or Letter paper, or type a word or a name to cut as one stencil. The closed letters already have their bridges. Free, no sign-up, drawn on your device.
A to Z sheets (A–Z and 0–9) in four fonts: tap one
Loading the A to Z sheet…
Restored your last letter stencil.
Bridges (lime) are thin strips of card left uncut so the middle of an O, A or R stays attached instead of falling out. Tap a bridge to remove it; tap near the edge of a piece to add one.
Size
Save the stencil
Print the PDF at Actual size (100 %). The SVG is for a cutting machine.
Bridges
Bridges per piece
The three stencil fonts carry their own bridges, so these settings only matter for Caveat Bold, whose loops the page bridges. Thin card or mylar holds with 1.5 to 2 mm; for plywood allow 3 mm or more.
Privacy: the letters are drawn inside this browser and your word is never uploaded. If you change the sheet or type a word, the text and the settings are kept in this browser's local storage on this device so they are there when you come back, and the word goes in the part of the address after #, which browsers do not send to any server. deletes it from this device in one tap. The page sends an anonymous page-view count and fixed event names ending in -letters (such as stencil-make-letters and stencil-download-letters), never your text. More in the privacy notice.
How to print a letter stencil
- Pick the font's sheet. The page opens on the Stardos Stencil sheet; tap another sheet above the size controls to switch. Each sheet is A to Z and 0 to 9 in 36 cells, 6 rows of 6.
- Set the letter height. Tap 3 in, 4 in, 6 in, 10 cm or 15 cm, or type any height from 1 to 60 cm (0.4 to 23.6 in). The height is that of the capital O, the tallest capital, so no letter comes out taller than you asked.
- Or type a word or a name. Up to 3 lines of 24 characters, centred, at the same height. A word comes out as one stencil with its letters already spaced; Letter spacing adds room between letters as a share of the height.
- Save the PDF and print it at Actual size (100 %). A sheet bigger than the paper is tiled over A4 or Letter pages that overlap by 10 mm. Measure the 10 cm check line on a page before you cut: if it is not 10 cm, the printer scaled it.
- Tape the pages together at the overlap and cut. For a cutting machine or a laser, save the SVG instead: it is drawn in millimetres at the same size.
What size to print: sheets and pages
A whole alphabet gets big fast. These are the page's own figures for the A to Z sheet, the cut area without the 12 mm frame round it, and how many pages its PDF prints on. Big Shoulders Stencil is narrow, so it needs the fewest pages; Saira Stencil One is the widest.
| Letter height | Stardos Stencil | Big Shoulders Stencil | Saira Stencil One | Caveat Bold |
|---|---|---|---|---|
| 1 in (2.5 cm) | 24.5 × 20.3 cm 2 / 2 pages | 16.5 × 20.3 cm 1 / 1 pages | 25.6 × 20.3 cm 2 / 2 pages | 21.8 × 20.4 cm 2 / 2 pages |
| 2 in (5 cm) | 49 × 40.6 cm 6 / 6 pages | 33 × 40.6 cm 4 / 4 pages | 51.2 × 40.6 cm 6 / 6 pages | 43.6 × 40.8 cm 6 / 6 pages |
| 3 in (7.6 cm) | 73.5 × 60.9 cm 12 / 15 pages | 49.5 × 60.9 cm 8 / 9 pages | 76.9 × 60.9 cm 12 / 15 pages | 65.4 × 61.2 cm 12 / 12 pages |
| 4 in (10 cm) | 98 × 81.2 cm 20 / 20 pages | 66 × 81.2 cm 15 / 15 pages | 102.5 × 81.2 cm 20 / 24 pages | 87.2 × 81.7 cm 20 / 20 pages |
| 6 in (15 cm) | 147 × 121.8 cm 42 / 40 pages | 99 × 121.8 cm 28 / 30 pages | 153.7 × 121.7 cm 42 / 45 pages | 130.7 × 122.5 cm 35 / 40 pages |
To print one big letter on its own, type just that letter: one letter at 10 cm fits on a single page, and you only print the letters your word needs.
How big for a sign, a wall or fabric
A sign. A common sign-makers' rule of thumb is about 1 inch of letter height for every 10 feet (3 m) the sign must be read from with ease. A house name on a gate seen from the street, 30 to 40 feet away, wants 3 to 4 inch letters; a label on a planter or a toy box read from a metre away is fine at 1 to 2 inches. Then check the length, because the font sets it: HOME at 6 in is 70 cm (27.6 in) long in Stardos Stencil and 41.7 cm (16.4 in) in Big Shoulders Stencil, so a narrow board takes the narrow font.
A wall. Measure the space first and divide by the number of letters. SOPHIE at 15 cm is 86.5 cm long in Stardos Stencil and 86.1 cm in Saira Stencil One, a little under the letter height per letter with the spacing; in Big Shoulders Stencil it is 51 cm, about 0.6 times. Wide letters such as M and W take more. Mark a level line with a spirit level or a laser and tape the stencil to it.
Fabric. A name on a T-shirt, a tote bag or a cushion is usually 2.5 to 5 cm (1 to 2 in) tall: SOPHIE at 5 cm is 28.8 cm wide in Stardos Stencil and 17 cm in Big Shoulders Stencil, so a long name on a child's shirt wants the narrow font or a smaller height. Below about 2.5 cm the font's bridges and the gaps inside letters get thin enough to tear in paper, so cut small letters from freezer paper, card or mylar.
Why O, A, B, D, P, Q and R have bridges
A stencil is a sheet with holes, and the paint goes through the holes. Seven capitals, A, B, D, O, P, Q and R, and the digits 0, 4, 6, 8 and 9, have a closed middle (typographers call it a counter). If you cut round the outside of an O, the middle drops out and you paint a solid blob. A bridge is a strip of the sheet left uncut across the letter that holds the middle in place; it leaves a thin gap in the painted letter, which is the look people know from crates and road markings.
Stardos Stencil, Big Shoulders Stencil and Saira Stencil One are drawn with their bridges, so their sheets have nothing to fall out and the page adds nothing. Caveat Bold is ordinary handwriting with closed loops: the page finds each one, the way a knife would, and ties it in with a straight bridge at the width set under Bridges (2 mm by default). On the Caveat sheet at 10 cm that is 12 bridges. Tap a bridge to remove it or near a loop's edge to add one; the line under the stencil says whether anything is still loose.
How to cut and paint letter stencils
- Material. Printer paper works once, for a quick sign. Card or cardstock lasts a few uses; mylar or acetate sheet (about 0.1 to 0.2 mm, 4 to 7 mil) can be washed and reused. For fabric use freezer paper, which irons on and peels off.
- Cutting. A sharp craft knife on a cutting mat; change the blade often. Cut the small inner shapes first while the sheet is still stiff, pull the knife towards you and turn the sheet, not the knife, on curves. Leave every bridge whole.
- Placing. Hold the stencil flat with low-tack painter's tape or a light coat of repositionable spray adhesive, so paint cannot creep under the edges. Line words up on a pencil or laser line.
- Painting. Use little paint. Load a stencil brush or foam dauber, dab most of it off on kitchen paper, then dab straight down; do not brush sideways under the edge. Two thin coats beat one thick one. On wood, a coat of the background colour (or clear sealer) over the stencil first seals the edges, so any bleed is invisible. Spray paint: several light passes from about 20 to 30 cm.
- Lifting. Peel the stencil off while the last coat is still slightly wet, straight up, so the edge stays crisp. Touch up the bridge gaps with a fine brush if you want solid letters.
What it cannot do
- No bubble letters. The four fonts are three stencil faces and one handwriting script; there is no rounded bubble or outline-only font, and you cannot load your own font file.
- The A to Z sheet is capitals and digits. There is no lowercase or punctuation sheet; type lowercase letters, or ! ? & and the like, as a word instead (up to 24 per line, 3 lines).
- No letter under 1 cm (0.4 in) or over 60 cm (23.6 in). Such heights are refused rather than drawn.
- A character the font does not have is refused by name, never drawn in another font. All four have the Western European letters (À to ÿ, Ø, ß); Stardos Stencil lacks most Central European ones, such as Ł or ź, so pick Saira Stencil One or Big Shoulders Stencil for those.
- Lines run straight and centred. No text on an arc or a circle, and no mixing two fonts in one stencil.
- It does not drive a cutter. It saves a file (PDF, SVG or PNG) that your printer or cutter's own software opens. For a photo or a picture, use the Stencil Maker, the same code with the photo controls.
Questions
Where can I get free printable letter stencils?
Here. Tap one of the four A to Z sheets, set the letter height in cm or inches and save the PDF: it prints A to Z and 0 to 9 at that true size on A4 or Letter pages, tiled with a 10 mm overlap when the sheet is bigger than one page. There is no sign-up and no watermark, and the SVG for a cutting machine is free too.
How big should stencil letters be for a sign?
A common sign-makers' rule of thumb is about 1 inch of letter height for every 10 feet (3 m) the sign has to be read from easily: 3 to 4 inch letters for a gate or a shed seen from across a garden, 1 to 2 inches for a planter or a box read up close. Then check the width: HOME at 6 in is 70 cm (27.6 in) long in Stardos Stencil but 41.7 cm (16.4 in) in the narrow Big Shoulders Stencil.
Why do some stencil letters have gaps (bridges)?
Because A, B, D, O, P, Q and R, and the digits 0, 4, 6, 8 and 9, have a closed middle. Cut round it and the middle falls out, so the paint fills the whole letter. A stencil font breaks each loop with a strip of uncut sheet, a bridge, that holds the middle in place. Stardos Stencil, Big Shoulders Stencil and Saira Stencil One are drawn with those bridges; for the handwritten Caveat Bold the page finds each loop and adds a straight bridge at the width you set.
How do I stencil letters on fabric or a T-shirt?
Print the letters at Actual size, trace or print them onto the matt side of freezer paper, cut them out and iron the stencil shiny side down onto the fabric, so it sticks and the paint cannot creep under the edges. Put card inside the shirt, dab fabric paint on with a stencil brush or sponge in thin coats, peel the paper off and heat-set the paint as its label says. A name across a child's T-shirt is about 4 to 5 cm (1.5 to 2 in) tall: SOPHIE at 5 cm is 28.8 cm wide in Stardos Stencil, 17 cm in Big Shoulders Stencil.
Are these bubble letters?
No. None of the four fonts is a bubble font: three are stencil faces with straight bridges and one is a handwriting script. If you need fat rounded bubble letters, this page does not draw them.