Polyatic Christmas window stencils
Tools

Christmas window stencils to print

Pick a motif, type the size of your glass, print. The snow spray stencil comes first; the chalk pen drawing prints mirrored, so it reads the right way from the street.

Your window

Glass cm

Settings

Paper
Type sizes in

Mirrored: you tape the sheet outside, printed side against the glass, and draw from inside. From the street the picture then reads the right way round. Untick it to tape the sheet inside and draw on the outside of the glass.

Everything stays on your device. Your browser draws the stencil in this page and saves it directly; nothing is uploaded. A download counts one anonymous event: the file type and the paper size, never the motif or your measurements.

Three ways to decorate a window for Christmas

Measure the glass inside the frame or beading and type its width and height (15 to 60 cm, 6 to 23½ in). The picture is scaled until 1 cm of clear glass is left all round. Want a set size instead, say a 50 cm star across a patio door? Choose Set the width and type the width of the picture itself; the print comes out at that width. When it is bigger than one sheet, the template spreads it over several pages, each with a part label (A1, A2, B1…), an 8 mm blue glue strip and cross marks. Trim the dashed edge, lay it on the neighbour's blue strip until the crosses sit on top of each other, and tape. Always print at 100% ("Actual size", never "Fit to page"): the black bar at the foot of each page must then measure exactly 5 cm.

The snow spray stencil

On a stencil, everything you cut away gets snow and everything left of the sheet blocks it. So for a snow star to keep its dark openings, those openings have to stay part of the sheet while snow surrounds them; cut naively, they would simply drop out. The generator ties every opening, and every enclosed centre such as the space inside the lantern's handle, to the sheet with straight bridges at least 3 mm wide (up to 5 mm on big pictures), placed where the band of snow is narrowest. An opening over 5 cm across usually gets a second bridge so it lies flat on the glass. On the page, grey is cut away and white stays; the sheet runs 2 cm past the picture on every side to catch overspray.

Worked example: the star for glass of 40 × 50 cm is 38 × 36.1 cm (15 × 14.2 in); its 15 openings are held by 30 bridges and the stencil prints on 6 parts, on Letter or A4. Up to glass of about 17 × 17 cm the star fits one sheet. Plain printer paper is fine for one or two windows but cockles under wet snow; a clear plastic sleeve or a sheet of acetate taped under the print and cut with it gives a stencil that lasts the winter. The honest trade-off: the bridges leave thin snow-free lines through the picture, like the lead in a stained-glass window. That is the price of a stencil that never loses a piece.

The chalk pen drawing

No card and no cutting. The sheet gives the outline and inner lines of the motif, mirrored, with a suggested colour in each area. Tape it to the outside of the glass, printed side against the pane, clean the inside and trace the lines from inside with a white chalk pen. After about five minutes the lines are dry and you can colour in. Because you draw it back to front, people outside see it the right way round, which matters for the reindeer (otherwise it pulls the sleigh backwards) and for the houses. For a ground-floor window you decorate from outside, untick "Print mirrored" and tape the sheet inside.

The paper silhouette with tracing paper

The silhouette has numbered openings: the grey stays, the openings are cut out. There is at least 6 mm of card between two openings and 7 mm at the edge, and an opening that would be wider than 17 cm gets an extra bar so every tracing-paper piece fits one sheet. Each opening has its own piece (the opening plus a 5 mm glue edge) with its number and colour, sorted by colour. Lay the print on black card of 160 to 220 gsm, clip it on and cut both layers together with a craft knife, so you never have to copy pencil lines onto black. The Kids version cuts with scissors: at least 8 mm of card between openings, openings at least 14 mm across and no corner sharper than 50°.

Common questions

Where can I get Christmas window stencils as a free printable PDF?

Right here, with no sign-up, no watermark and no paid version. The PDF holds every part of the stencil plus a how-to page; every page also saves as a 300 dpi PNG. All ten motifs are our own drawings, so print them for home, a classroom or a shop window as often as you like.

How do I make a large Christmas window stencil?

Choose Set the width (large) and type the width you want, up to 58 cm (about 23 in). A 50 cm star prints on 8 A4 sheets or 9 Letter sheets. Tape all the parts together on the cross marks before you cut: a bridge that runs across a join is printed on both neighbouring sheets, and cutting them separately would cut it in two. Tall motifs stop earlier, because no picture grows past 58 cm tall: the candle and the lantern reach about 30 cm wide, the snowman 34 cm, the tree 45 cm. For a picture bigger than that, use a second window or a second motif beside it.

What should I make a reusable snow spray stencil from, and which snow?

Easiest: the printout taped with double-sided tape onto a plastic sleeve or acetate, then both cut together with a craft knife. Thin card works too, but it soaks up moisture and warps after a few uses. Spray snow from 20 to 30 cm (8 to 12 in) in thin coats. With no can, an almost dry sponge and white poster paint, or diluted white toothpaste, gives a frosted look. On smooth glass the snow wipes off dry with a cloth, then glass cleaner; avoid coated or self-cleaning glass and test a corner first.

Which chalk pen for Christmas window painting, and does it come off?

A white chalk pen (liquid chalk marker) with a 2 to 6 mm tip is enough for the lines; colours for filling in are up to you. It is water-based chalk: on smooth, untreated glass a sponge with warm water or glass cleaner removes it, and a glass scraper lifts dry remains. On frosted, textured or coated glass, or on a uPVC frame, the colour can stay in the pores, so try a corner first.

What are easy Christmas window painting ideas for kids or a class?

The easiest designs are the lantern, the candle and the star, with big straight openings. The snowman and the tree are middling. The reindeer and sleigh, the nativity and the village houses have lots of small parts: keep them for older children or for the chalk pen. With little ones the chalk pen often works better than scissors: a grown-up tapes the template outside and the children trace on the glass from inside.

Can I cut the stencil template with a Cricut or a Silhouette?

Yes. The SVG holds the cut lines at true size, in millimetres, in the group "cut": for the stencil, the sheet edge, the outline, the openings and the bridges; for the silhouette, the outline and the openings. The DXF has the same lines on the layer CUT, for software that will not open SVG, such as the free edition of Silhouette Studio. For the chalk pen, both files hold the mirrored lines, for a pen plotter for example. Mind the mat: most machines take at most 30 cm (12 in) across.

More for the windows: the paper Christmas village has a strip of houses for a windowsill, and the paper snowflake maker folds and cuts flakes to tape beside your stencil.

Made with AI tools. · Privacy